How To Start Poulan Chainsaw?

Alex Ortiz
By Alex Ortiz 14 Min Read
14 Min Read
how to start poulan chainsaw featured

Hey there! Got a brand new Poulan chainsaw and scratching your head about how to kick it into gear? Don’t worry; you’re in the right spot. Starting up this baby isn’t rocket science, but there are a couple of pointers I’d love to share with you. So, let’s dive in, and by the end of this, you’ll be a chainsaw-starting pro! Oh, and safety first – we’ll cover that too.

Before we get all excited and start the chainsaw, let’s chat about safety. It’s like preparing for a fun day out – you need the right outfit! Make sure you’re wearing:

  • Gloves: Because splinters aren’t fun.
  • Eye Protection: Keep those eyes safe. You only have two of them!
  • Ear Protection: Chainsaws can be loud. Protect those ears!
  • Sturdy Shoes: Closed-toe shoes or boots. No sandals, please!
  • Long Pants or Chaps: Protect those legs.

Got everything on? Great! You’re now dressed for chainsaw success.

Now, for the actual starting part. But first, a tiny prep. Make sure your chainsaw has:

  1. Properly Mixed Fuel: This is super important! Pouring in the wrong mix might harm your chainsaw. And who wants that?
  2. Bar Oil Lubrication: This keeps things running smooth. Without it, your chainsaw’s bar and chain could get way too hot, and its life might get cut short (pun intended!).

To sum it up, fuel and oil are like the food and drink for your chainsaw. Feed it right, and it’ll purr like a kitten.

How To Start A Poulan Chainsaw – 14 Easy Steps

Ready to make that Poulan chainsaw come to life? Let’s get right into it. Starting a chainsaw isn’t just about pulling a rope; it’s a process. But don’t worry – I’m here to walk you through it, step by step. Let’s turn that chainsaw rumble into music to your ears!

1. Brake On! First things first, engage the blade brake by pushing the brake handle forward. Safety first!

2. Ground Control Place that chainsaw firmly on the ground. It’s like its own little launching pad.

3. Foot Position Slide your right foot through the rear handle. This will help you get a good grip.

4. Lefty Ready With your left hand, take hold of the front handle. Firm grip here!

5. Power Up! Slide the On/Off switch to the On position. We’re getting closer!

6. Choke Out Pull out the choke knob to its full extension. This helps get things ready to roll.

7. Prime Time Push the primer bulb between 5 to 7 times. Think of it as a little exercise for your thumb.

8. Throttle Time Now, squeeze and hold that throttle trigger, and give it a press.

9. Fast Idler Fun Using your thumb, press the fast idler lock. Once done, release the trigger.

10. Right Hand Magic Grab the starter handle with your right hand. This is where the magic happens.

11. Rope Rumble Give the rope a good pull about 5 times with your right hand. But hey, if you hear the engine sounding like it’s about to start before the 5th pull, stop there.

12. Choke Push Push the choke knob all the way back in. Then, give that rope another pull until you hear the engine roar to life.

13. Let It Breathe Once it’s started, let it run for a brief 5 seconds. After that, squeeze and release the trigger, letting your chainsaw settle into a nice, smooth idle.

14. Celebrate! And now, the most important step… Give yourself a pat on the back. You did it! Your Poulan chainsaw is alive and ready for action.

How Do I Get My Poulan Chainsaw to Start?

Ready to fire up your Poulan chainsaw? But before we jump into the how-to, let’s ensure you’re all set safety-wise, and you’ve got the right fuel mix. Let’s roll!

1. Safety First! Dress the Part Before you even touch that chainsaw, make sure you’re decked out in the proper gear. Imagine you’re going on an adventure – but with a chainsaw. Here’s your checklist:

  • Gloves: No splinters today!
  • Eye Protection: Goggles on! Keep those peepers safe.
  • Ear Buds? Nope, Ear Protection!: Chainsaws can get LOUD.
  • Shoes: Solid, closed-toe shoes or boots. Sandals? Not today.
  • Legs: Cover them up with long pants or chaps.

Looking sharp! Now, let’s move to the next phase.

2. Feed Your Chainsaw Before starting, let’s make sure it’s well-fed.

  • 2-Stroke Fuel: Check that your gasoline tank has the right mix. This is like choosing the best food for a pet; you don’t want to get it wrong.
  • Bar Oil: This is its drink. Without it, your chainsaw will heat up super fast. Imagine running a marathon without water. Ouch, right?

3. Time to Roar! Starting Steps Now the fun part. Roll up those sleeves and follow along:

  • Brake Ready: Engage that blade brake. Push the brake handle forward.
  • Grounded: Let the chainsaw sit comfortably on the ground.
  • Position Time: Slip your right foot through the rear handle. Grip the front handle with your left hand.
  • Switch it Up: Flip the On/Off switch to ‘On’.
  • Choke’s On You: Extend the choke knob fully.
  • Primer Workout: Press the primer bulb 5 to 7 times. Think of it like priming a water gun.
  • Throttle Up: Squeeze and hold the throttle trigger, then give it a press.
  • Idler Moment: Press that fast idler lock using your thumb. Now, let the trigger go.
  • Rope Magic: Hold the starter handle and give the rope a yank about 5 times. If the chainsaw starts growling before the 5th pull, stop there.
  • Final Choke Move: Push the choke knob back in. Pull the rope once more. Listen to that engine purr!
  • Smooth Operator: Let it run for 5 seconds, then gently squeeze and release the trigger. Now it’s just humming smoothly.

How Do You Start a Chainsaw That Has Been Sitting?

Alright, so your trusty chainsaw’s been chilling in the garage (or shed) for a bit too long and now seems to be a tad lazy? No worries! Like waking up a bear from hibernation, there are a few steps to ensure it’s up and roaring safely. Here’s your game plan:

1. Out with the Old First things first, dump any old fuel that’s been sitting in your chainsaw. It’s probably stale by now.

2. Peek at the Fuel Lines Give all the fuel lines and the fuel filter a good look. Feeling hard? See any breaks? If they’re looking less than ideal, swap ’em out for new ones.

3. Spark Plug Love The spark plug is like the heart of your chainsaw. Either give it a good cleaning or just replace it to make sure your chainsaw gets the spark it needs.

4. Breathe Easy The air filter ensures your chainsaw breathes clean air. Check it out, and either clean it up or replace it.

5. Fuel Up Freshly Now, fill ‘er up with fresh fuel. It’s like giving it a fresh cup of morning coffee.

6. Gentle Wake Up Start your chainsaw and let it run on low rpm for about 30 seconds. This helps get that new fuel coursing through its system.

7. Stretch and Rev Accelerate your chainsaw to its full rpm, then release the trigger a few times. Imagine it’s doing its morning stretches.

8. Idle Check Lastly, when it’s idling, make sure the chain isn’t spinning. If it is, simply turn the idle screw counterclockwise a bit. You’re aiming for the chainsaw to idle without the chain moving. Safety first!

How Many Pulls Should It Take To Start a Chainsaw?

Ever wondered, “How many times should I pull this thing before my chainsaw roars to life?” Let’s dive into that!

The Magic Number Okay, there isn’t exactly a “magic” number, but typically, if your chainsaw is in good shape, you’re looking at 1 to 5 pulls. Yep, that’s the sweet spot.

Too Many Pulls? Red Flag! However, if you’re giving it more than 10 hefty tugs and still nothing? Hmm, that’s a sign. Something might be off, and it could be time to do some detective work or consult a pro.

Common Culprits When Your Chainsaw Plays Hard to Get:

  • Air Filter Issues: If it’s all dirty and clogged, your chainsaw won’t breathe properly. Give it a clean or replace it.
  • Spark Plug Woes: A fouled or dirty spark plug? That could be your problem right there. Check and clean or replace as needed.
  • Fuel Frustration: Using old, stale fuel is like trying to run a marathon after eating a bunch of junk food. Make sure you’ve got fresh fuel in there.
  • Carburetor Clogs: A clogged carburetor can also be a party pooper. It might need a clean or adjustment.
  • Ignition Coil Conundrums: If the ignition coil’s damaged, that’s a definite hurdle. You’ll need to check it out.

DIY or Call a Pro? Many of these issues can be tackled at home with a bit of know-how, patience, and the right tools. But, if you’re unsure, it’s always better to consult a professional to avoid further damage.

Poulan Chainsaw Troubleshooting

Is your Poulan chainsaw acting a bit grumpy and not starting up? No sweat! Let’s walk through some simple fixes to get it back in action.

1. Freshen Up the Fuel!

  • Fuel ages like milk, not wine. If your fuel’s been sitting for over a month, give it the boot and replace it with fresh stuff.

2. Fuel Line & Filter Fitness Check

  • Peek at those fuel lines and the fuel filter. If they’re feeling tough or show any breaks, it’s time for a change. Think of it like swapping out old sneakers for a new pair.

3. Sparkle That Spark Plug

  • Time for some spark plug love! Either clean it up to its former shiny self or replace it.

4. Test the Spark

  • Using a spark tester (you can find one easily on Amazon), check if the ignition coil is doing its sparky thing. If not, it might be the culprit.

5. Let it Breathe – The Air Filter

  • A clean air filter means a happy chainsaw. So, check it out! If it looks like it’s been through a sandstorm, either clean it or treat your chainsaw to a new one.

And there you have it, five simple steps that should get your Poulan chainsaw singing again. But, if it’s still throwing a fit, it might be time to call in the professionals. They’re like chainsaw doctors, ready to diagnose and fix any complex issues.

Wrapping Up

So there you have it, pals! Firing up a Poulan chainsaw can be as smooth as pie, provided you dance to the right steps. Safety is the name of the game – rock that protective gear and never, I mean NEVER, forget about engaging that blade brake.

Got more questions bubbling up? Drop ’em in the comments below, and we’ll be right here, ready to lend a hand. Cheers for hanging out, and here’s to many happy chainsawing adventures! 🌳🎉🔗 Until next time!

Frequently Asked Questions

1: How do I start a Poulan chainsaw?

To start a Poulan chainsaw, follow these steps:
  • Ensure the chainsaw is on a flat and stable surface.
  • Engage the chain brake by pushing it toward the front handle until it clicks.
  • Push the choke control to the full choke position.
  • Prime the engine by pressing the primer bulb 5-6 times until fuel is visible in the bulb.
  • Set the master control lever to the "ON" position.
  • Pull the starter rope firmly until the engine fires, and then push the choke control to the halfway position.
  • Pull the starter rope again until the engine starts.
  • Let the engine warm up for a few minutes before releasing the chain brake and using the chainsaw.

2: What fuel mixture should I use for a Poulan chainsaw?

Poulan chainsaws require a fuel mixture of unleaded gasoline and 2-cycle oil. The recommended ratio is 40 parts gasoline to 1 part oil (40:1). Use a high-quality 2-cycle oil that is specifically designed for air-cooled engines.

3: How often should I sharpen the chainsaw chain?

The frequency of chainsaw chain sharpening depends on usage, but as a general guideline, it is recommended to sharpen the chain every 3-5 hours of operation. Dull chains can cause inefficient cutting, excessive heat, and increased wear on the chainsaw.

4: Can I use a chainsaw bar and chain oil substitute?

No, it is not recommended to use substitutes for chainsaw bar and chain oil. These oils are specially formulated to provide lubrication, reduce friction, and prevent the chain from overheating. Substitutes may not offer the same level of protection, leading to premature wear of the chain and bar.

5: How should I store my Poulan chainsaw?

When storing your Poulan chainsaw, adhere to the following guidelines:
  • Empty the fuel tank and run the chainsaw until it stalls to prevent fuel from degrading and causing damage.
  • Clean the chainsaw thoroughly, removing any debris or sawdust.
  • Store the chainsaw in a dry and secure location, away from potential sources of ignition.
  • Cover the chainsaw with a protective case or sheath to prevent dust and moisture accumulation.

6: Can I use E85 (ethanol) fuel in my Poulan chainsaw?

No, it is not recommended to use E85 or any fuel with more than 10% ethanol in Poulan chainsaws. High-ethanol fuels can cause damage to the engine components, carburetor, and fuel lines. Stick to the recommended fuel mixture of unleaded gasoline and 2-cycle oil.

Share This Article
Leave a comment

Leave a Reply

Your email address will not be published. Required fields are marked *